Suspension
Brakes & Rotors
Engine &
Transmission |
Electrical
Safety
Seat & Steering Wheels
Body |
Questions? Comments?
Can't find what you're looking for?
Please contact
sales@werkstattcville.com.
Check out our
RECLAIMED PARTS FOR SALE
|
 |
Bilstein PSS9 Kit
986/986S
Suspension Kit for the Boxster thru '04 (Bilstein
PSS 9 System). Front and Rear Coil Over Shocks
with Springs. Ride Height Adjustable. 9 Precise
Compression and Rebound Settings, from Comfort
to Competition. $2,275.00
|
|
TARETT
ENGINEERING
Front Drop Link
Set, 996/997, Boxster & Cayman
Upgrade your stock front swaybar with this
simple bolt in replacement for the factory drop
links. Left & right hand threaded rod ends allow
for simple length adjustment to eliminate
swaybar preload. Correctly sized, precision,
Teflon-lined rod-ends for smooth and quiet
operation, long life, and high reliability.
Precisely connects the stock or adjustable
swaybar to the front strut assembly for improved
feedback and swaybar response. Overall length is
adjustable to accommodate either stock or
adjustable swaybar requirements. For all 996 and
Boxster except 996 C4. $275.00
|
 |
TARETT
ENGINEERING
Rear Drop Link
Set, All Boxster & Cayman
Upgrade your stock or adjustable rear swaybar
with this simple bolt in replacement for the
factory drop links. Left & right hand threaded
rod ends allow for simple length adjustment to
eliminate swaybar preload. Correctly sized,
precision, Teflon-lined rod-ends for smooth and
quiet operation, long life, and high
reliability. Precisely connects the stock or
adjustable swaybar to the rear strut assembly
for improved feedback and swaybar response.
Overall length is adjustable to accommodate
either stock or adjustable swaybar requirements.
$200.00
|
 |
TARETT
ENGINEERING
986 Rear
Swaybar Assy, 19.1 mm, 4 pos adj, all Boxster &
Cayman
Light weight hollow 19.1mm OD sway bars are half
the weight of a solid bar with the same
stiffness. Complete with fully adjustable front
drop links to eliminate suspension preload.
Correctly sized, precision, Teflon-lined
rod-ends for smooth and quiet operation, long
life, and high reliability.. All necessary
hardware is provided in zinc plated metric class
8.8. Four attachment hole positions allow for
quick and easy swaybar stiffness rate
adjustment, to fine-tune your car's handling for
various track conditions and driving styles. The
set comes complete with new bushings. Fits all
Boxsters and Caymans. BSR & BSX class legal.
$425.00
|
 |
TARETT
ENGINEERING
Front Swaybar &
Drop Link Kit, 26.8mm, 5 pos adj, all 996/997,
Boxster & Cayman
Factory GT3 swaybar packaged together with new
bushings and adjustable drop links. Light weight
hollow 26.8mm OD sway bars are half the weight
of a solid bar with the same stiffness. Complete
with fully adjustable front drop links to
eliminate suspension preload. Correctly sized,
precision, Teflon-lined rod-ends for smooth and
quiet operation, long life, and high
reliability. All necessary hardware is provided
in zinc plated metric class 8.8 Five attachment
hole positions allow for quick and easy swaybar
stiffness rate adjustment, to fine-tune your
car's handling for various track conditions and
driving styles. $625.00
|
 |
Under-Drive
Pulley
Designed to slow down the power steering pump to
prevent it from overheating in racing
conditions, this pulley will quickly pay for
itself by not just saving your pump, but also
your weekend at the track. The pulley is fully
balanced and is a 16% reduction. An added
benefit is increased power and torque across the
entire RPM range. The kit comes complete with
the pulley, tension adjusting tool, and a new
pulley bolt. . Fits all 986, 987, 996 and 997
except the 997 3.8L. Technical note: A boss
on the front of engine case will need to be cut
down slightly to clear the smaller pulley size.
$249.00
|
 |
Boxster Clutch
Kit
986 1166 911 00
Sachs kit includes disc, pressure plate, and
release bearing. Offers increased torque
capacity, endurance and high performance
stability; Guarantees increased clamp load;
Flywheel not included $445.50
|
|
Boxster SS
Engine Mount
The WEVO Boxster SS Racing Engine mount is
designed for competition cars and offers maximum
control of the drivetrain mass – without overt
concessions to NVH (Noise Vibration Harshness).
This competition series mount is installed
within the original Boxster (986 or 987) mount,
re-using the die cast aluminum housing and flat
rubber isolator flaps that straddle the mount.
Unlike Solid engine or transmission mount
systems, the Semi Solid installation provides
sufficient isolation from engine vibrations to
protect your sensitive engine control
electronics and instrumentation systems.
Suited for the following application(s): 986,
987 years: 1995 to present. Technical Note: A
press and selection of press tools will be
necessary to remove the O.E. rubber mount prior
to installation of the WEVO SS Racing Engine
Mount. Installation of the WEVO SS Racing Engine
Mount requires no special tools. $133.00
|
 |
Boxster
Semi-Solid Transmission Mounts
From WEVO, simple and easy bolt-in replacement for the hydroelastic O.E. parts. These mounts reuse the
existing triangular mounting cranes on the side
of your transmission. Two mounts required for
application. Suited for the following
application(s): 986, 987 years: 1995 to present.
Technical Note: The M12 bolt through the
Engine or Transmission mount should be tightened
to 40 ft/lbs or 55 Nm. The M12 Schnorr
(serrated) washer should be installed directly
under the head of the M12 bolt. The M8 hardware
should be tightened to 18 ft/lbs or 25 Nm using
the original arrangement of washer and nut.
$155.00 each
|
 |
BK Deep Sump
Oil Pan Kit
Deep Sump Oil Pan Spacer for 996 and Boxster
adds a half quart capacity and reduces oil
starvation from the lateral forces of
competitive driving. Precision water jet
machined aluminum, fits above factory skid
plate, and requires only slight modifications to
the sump baffle. Comes with new fasteners.
Approved by the Porsche Club of America for use
in Stock and Prepared Class club racing.
$242.29
|
 |
Pagid RS 14
Brake Pads - Front 0510-U2407RS14
The "black" compound. This is a medium high
friction value ceramic type compound with a very
good modulation, high fade resistance, low heat
conductivity and a good wear rate up to a
temperature of 650c degrees (1,200f). It is
"kind" on discs, with visible grooving, but a
limitation of hairline cracks. Applications
include: NASCAR, CART, F3, Touring Cars, GT
Cars, WSC, Trans Am and rally racing. $244.64
|
|
Pagid RS 14
Brake Pads – Rear 0510-U2406RS14
The "black" compound.This is a medium high
friction value ceramic type compound with a very
good modulation, high fade resistance, low heat
conductivity and a good wear rate up to a
temperature of 650c degrees (1,200F). It is
"kind" on discs, with visible grooving, but a
limitation of hairline cracks. Applications
include: NASCAR, CART, F3, Touring Cars, GT
Cars, WSC, Trans Am and rally racing. $212.96
|
|
|
Pagid RS 19
Brake Pads – Front
The combination of friction value, fading
stability and low wear rates on pads and discs
realized with this pad compound is unmatched.
Due to its outstanding wear rate and
drivability, it's also used at many sprint
races. Application: all endurance racing cars
from group N up to GT and Sport Cars. A multiple
winner of Daytona, Le Mans, Sebring, Spa,
Nurburgring - usually with no pad or disc
change. $306.25
|
|
Pagid RS 19
Brake Pads – Rear 0510-U2406RS19
The combination of friction value, fading
stability and low wear rates on pads and discs
realized with this pad compound is unmatched.
Due to its outstanding wear rate and
drivability, it's also used at many sprint
races. Application: all endurance racing cars
from group N up to GT and Sport Cars. A multiple
winner of Daytona, Le Mans, Sebring, Spa,
Nurburgring - usually with no pad or disc
change. $278.08
|
|
|
Pagid RS 29
Brake Pads – Front
New endurance compound. The RS 29 compound has
the same wear characteristics as the RS19 but
with slightly harder initial bite. This compound
combines the outstanding wear rate of the RS19
with a slightly higher coefficient of friction.
$306.25
|
|
Pagid RS 29
Brake Pads – Rear 0510-U2406RS29
New endurance compound.
The RS 29 compound has the same wear
characteristics as the RS19 but with slightly
harder initial bite. This compound combines the
outstanding wear rate of the RS19 with a
slightly higher coefficient of friction. $278.08
|
 |
Brembo
Replacement Rotors – Front Fitment
Brembo OEM Replacement Brake Rotors are direct
replacements for your vehicle. Choose the best
with Brembo and relax with the confidence in the
worlds highest quality Brake Rotor. All Brembo
OEM Replacement Brake Rotors are manufactured
under QS-9000 and ISO 9001 certifications to
assure the at level of quality in all products.
$175.00 each
|
|
|
Brembo
Replacement Rotor – Rear Fitment
Brembo OEM Replacement Brake Rotors are direct
replacements for your vehicle. Choose the best
with Brembo and relax with the confidence in the
worlds highest quality Brake Rotor.All Brembo
OEM Replacement Brake Rotors are manufactured
under QS-9000 and ISO 9001 certifications to
assure the at level of quality in all products.
$125.00 – each
|
 |
Stainless Brake
Hose Kit DOT
D.O.T. approved. Stainless steel braided brake
hose kit. Much more durable than stock brake
lines due to stainless steel braiding.
Manufactured with stainless steel fittings, not
aluminum, for increased strength. These braided
hoses with strong Teflon inner tubing are simply
the best way to transmit hydraulic pressure from
your foot to your brake calipers with maximum
efficiency. Sold in sets of four. $80.95
|
|
|
Master Battery
Cutoff Switch with Alternator Protection
This switch has three sets of contacts for cars
with alternators. The main contacts disconnect
the battery while the auxiliary contacts
disconnect the ignition coil and short the
alternator output to ground through a 3 ohm
resistor that is furnished with the switch. A
removable actuating key with splash guard,
weather-proof cap, resistor and installation
instructions are included. (Resistor lead
configuration may vary from the photograph
shown.) $35.99
|
 |
Braille Auto
Development Lightweight Carbon Battery – 11.5
lbs
Designed for high amperage, high stress use of
racing competitions. Technically registered as a
"sealed valve regulated" design, this patented
technology completely eliminates acid spills and
corrosion on terminals. This design is
environmentally safe does not need filling and
maintenance. Robust stainless steel heli-coil
design threads allow higher bolt torque and help
keep your battery connected even in high
vibration environments. Every Braille Battery is
individually tested and certified before
shipping, eliminating DOA batteries. Fully
charged and ready to install at time of
shipping. $229.99
B14115C
11.5lbs/5kg
904 Pulse Cranking Amps
15 Amp/Hr Reserve
5.8” x 3.4” x 5.8”
Left Side Positive
Inquire about custom battery cables.
|
 |
B14115/ B14115C
Aluminum Mount Kit
Vertical and horizontal aluminum mount kit for
B14115 and B14115C models. All forms of racing
sanctioning bodies require secure mounting of
the battery. This mount is designed to meet and
exceed these requirements. Features stamped
"positive" and "negative" markings to allow easy
readability and avoid hooking up the battery
incorrectly. $65.99
|
 |
Braille Auto
Development Lightweight Carbon Battery – 15 lbs
Braille's exclusive Carbon Fiber Case protects
the batteries internals from high temps and
provides the longest service life. Exclusive
dual terminal design allows the battery to be
mounted in a variety of positions. Designed for
high amperage, high stress use of racing
competitions. Technically registered as a
"sealed valve regulated" design, this patented
technology completely eliminates acid spills and
corrosion on terminals. This design is
environmentally safe does not need filling and
maintenance. Robust stainless steel heli-coil
design threads allow higher bolt torque and help
keep your battery connected even in high
vibration environments. Every Braille Battery is
individually tested and certified before
shipping, eliminating DOA batteries. Fully
charged and ready to install at time of
shipping. $239.99
B2015C
15lbs/6.8kg
1067 Pulse Cranking Amps
20 Amp/Hr Reserve
6.8” x 3.4” x 6.1"
Right Side Positive
Inquire about custom battery cables.
|
 |
B2015 / B2015C
Aluminum Mount Kit
Vertical and horizontal aluminum mount kit for
B2015 & B2015C Models. All forms of racing
sactioning bodies require secure mounting of the
battery. This mount is designed to meet and
exceed these requirements. Features stamped
"positive" and "negative" markings to allow easy
readability and avoid hooking up the battery
incorrectly. $70.99
|
 |
MOMO
Steering
Wheel – Mod 78 350 mm R1909
Momo racing steering wheels for all racing
requirements. Anticorodal aluminum, Suede
Leather. Flat Spokes. Includes horn button.
350mm/13.8 in. $190.00
|
|
|
MOMO Adaptor
Hub
$64.95
|
 |
Lifeline Quick
Release
The Lifeline quick release steering boss is CNC
manufactured using aircraft quality aluminum,
hard anodized for strength and durability. Both
male and female splines are precision gear cut
incorporating a master spline for accurate
alignment. Designed to be bolted to any
combination of aftermarket wheel and hub with a
6 x 70mm bolt pattern, e.g. OMP or MOMO.
$295.00
|
 |
Lifeline Quick
Release, 8 Pin
Quick Release Steering Boss with a pre-wired 8
way electrical connector to allow the use of
steering wheel mounted instruments or switch
gear. The Lifeline quick release steering boss
is CNC manufactured using aircraft quality
aluminum hard anodized for strength and
durability. Both male and female splines are
precision gear cut incorporating a master spline
for accurate alignment. The Lifeline quick
release steering boss allows you to use the
quick release mechanism in conjunction with any
aftermarket steering wheel boss that has a 6 x
70mm PCD steering wheel fitment (e.g. OMP or
MOMO). $550.00
|
 |
TeamTech Mesh
Window Net
This window net is made with a special honey
comb mesh, which consists of polyester tire
core. It provides high visibility, super
protection and great UV resistance. The racer
also has the option of painting his/her logo or
name on the net. Meets SFI 27-1 specs. Stock
window nets measure 18" x 24". Custom size
and shape window nets and grommets, where legal,
are also available (call for pricing).
$27.63
|
 |
Universal
Window Net Mount Kit
Rods, seat belt buckle and weld-on tabs are
included in this mounting kit. $69.99
|
 |
SPA Fire
System, 4L Electrical
6 nozzle electric system. Factory equipment on
the Porsche Factory Race Cars, Including 996 GT3
Cup Cars. Includes 12 lb. capacity bottle, 6
nozzles and internal and external triggers. 15
lbs. total weight. Bottle Dimensions: 333mm long
including firing head, 156mm outside diameter.
$639.00
|
 |
SPA Fire
System, 4L Mechanical
6 nozzle manual system, AFFF 4L capacity.
Includes 12 lb. capacity bottle, 6 nozzles and
two cables (6ft and 12ft). 15 lbs. total weight.
Bottle Dimensions: 333mm long including firing
head, 156mm outside diameter. $375.00
|
|
|
SPA Pull Cable,
6ft (1.83m)
This teflon coated sheath pull cable will make
your remote pull cable search come to an end. It
is very versatile and can be shortened to
accommodate any of your cut off switch, fire
system or other needs. $28.00
|
 |
SCCA Off Decal
for Master Switch
This decal meets the standards of the SCCA and
IMSA for the "international marking of a spark
in a blue triangle" to mark kill switch
location. $0.99
|
 |
BK Fire Ext
Mount 996/986
Fire Extinguisher Mount for the 996 and Boxster
with the Competition Seats. Made of 3/16" thick
6061-T6 Aluminum / 12 Gauge 304 Stainless Steel.
This mount works with R-9030 Anti-Submarine
Strap Mount and 2510-R907X series side mount
brackets in conjunction with factory non power
996/Boxster sliders. This Fire Extinguisher
Mount utilizes the seat to place a quick release
2.5lb. fire extinguisher directly below the
driver or passengers legs. This places the
extinguisher where it is instantly usable on the
feet and in an easy location for handheld
operation. They bolt in without drilling or
fabrication and most move with the seat as it
travels for a perfect fit, no matter where you
sit. 1 lb. 2 oz. $96.96
|
 |
Teamtech 6 pt
3-2-3 Harness
A Teamtech harness designed specifically for use
with the HANS device. Full 3" webbing contoured
to 2" where the harness contacts the HANS yoke.
Each harness includes shoulder and lap belt pull
release tabs and a pelvic pad. The patented
rotary release buckle has stainless steel inner
parts making it tough, dependable and corrosion
resistant. $299.00
|
 |
Teamtech
Pro-Arm Restraints
Meets SFI specs. Tough, high quality and fully
adjustable by Velcro wrap-around straps. A must
for open top vehicles, keeps your hands inside
the cockpit and not flopping around outside in
case of rolling the chassis. Tough, high quality
and fully adjustable by Velcro wrap-around
straps. $34.50
|
 |
OMP Hood Pins
Aluminum quick release bonnet pins with
stainless steel hardware. Available in Blue, Red
and Silver. $42.00
|
